OEM & ODM footwear manufacturer · Quanzhou, China

Casual Shoes · OEM & ODM · Quanzhou, China

Custom Premium Casual Shoe & Sneaker Manufacturer

As a casual shoe manufacturer, we help footwear brands and first-time shoe labels go from a sketch or a reference pair to a casual shoe that is truly theirs — sampled in days on our existing lasts and molds, then built on a private outsole mold that belongs only to your brand.

3–7 daysSamples on existing lasts & molds
US$28+Sample fee, credited to bulk
US$700+Private mold, owned by your brand
500 pairsMOQ per style, colors & sizes mixed

Get a casual shoe quote in 24 hours

Share what you have — a photo of a reference shoe is enough to start.

Reply within 1 working day [确认响应时效] · NDA available

Your Starting Point

Start From Where Your Brand Is Today

One factory, three different routes to your first bulk order.

A first-time shoe label, a brand adding a casual line and a brand moving production from another factory need different things from a casual shoe manufacturer. Choose the one that describes you — the route, costs, tooling and timeline below change with it.

    What to Prepare

      Where Brands on This Route Get Stuck

      Start Route A

      8Years in footwear development & manufacturing
      8Production lines
      70+Employees, incl. a 12-person development team
      1,600Pairs per day lasting & assembly capacity
      800+Public outsole molds to sample on
      04
      Product Range

      Casual Shoe Range for Men's, Women's & Unisex Collections

      Six product directions, each a starting point you can customize.

      Every style below is a development we have already built — so it can be sampled quickly on its existing last and sole. Change the materials, colors and branding, or take it further with your own last and private outsole mold. Starting from a proven pattern is the quickest way to work with a casual shoe manufacturer.

      Add the styles you like to your quote list; they are pre-selected in the quote form.

      CUPSOLE · SUEDE
      Minimalist Brown Suede Cupsole Sneaker From A Casual Shoe Manufacturer In China

      Minimalist Suede Cupsole Sneakers

      Clean low-top suede sneakers on a stitched rubber cupsole — the core of most premium casual collections.

      Upper
      Cow suede, calfskin lining
      Build
      Cupsole, stitched or cemented
      Sample
      3–7 days on existing last & sole
      MOQ
      500 pairs / style, colors & sizes mixed
      PANELLED
      Panelled Textile And Suede Lifestyle Sneaker In Olive, Grey And Burgundy

      Panelled Lifestyle Sneakers

      Mixed suede, textile and leather panels in tonal or contrast colorways.

      SLIP-ON · CALFSKIN
      Dark Brown Calfskin Concealed-Lace Slip-On Casual Shoe

      Calfskin Concealed-Lace Slip-Ons

      Smart casual and business casual shoes with a hidden elastic lacing system.

      RUNNER
      Grey And Navy Retro Textile Runner Sneaker

      Retro Runners

      Suede overlays on textile or mesh, on a cemented EVA and rubber sole unit.

      CHUNKY
      Cream And Blue Chunky Retro Mesh Runner Sneaker

      Chunky Mesh Runners

      Layered mesh and suede with a sculpted, thicker midsole profile.

      Six Colorways Of A Concealed-Lace Leather Casual Shoe On A Wooden Floor
      One Last · One Private Sole · Six Colorways

      Men’s Casual Shoes & Leather Sneakers Built as a Collection

      The same last, pattern and sole developed once, then extended into a full color story — navy, sand, cream, grey, taupe and brown. A private mold is paid once and reused for every colorway and every re-order.

      • Each style = 500 pairs, colors and sizes mixed across the run
      • Shade bands approved per color before cutting
      • One mold, many SKUs — tooling cost spread across the line
      Samples & Tooling

      Samples, Public Molds & Private Molds — How They Work Together

      A sample shows you the shoe. A private mold makes it yours.

      A sample is built on lasts and outsole molds that already exist in our factory, which is why it costs from US$28 and takes 3–7 days. Opening a private mold means re-working the last, the sole shape, the tread and the logo — it costs more and takes longer, but it is how established brands own their product. The trade-offs between the two routes are laid out in OEM vs ODM shoes.

      STEP 01 · VALIDATE

      Sample on Existing Lasts & Molds

      3–7 daysfrom US$28 / pairfrom 1 pair

      Your upper design, materials and colors made on one of our existing lasts and public outsole molds.

      Answers: does the design look right, do the materials work, is the price in range?

      →
      STEP 02 · OWN IT

      Open Your Private Mold

      from US$7007–15 days mold making

      We adjust the last to your fit, design the sole profile and tread, and mold your logo into the outsole. Then a mold-trial sample is made.

      Price depends on the complexity of the last and sole.

      →
      STEP 03 · PRODUCE

      Bulk on Your Own Mold

      28–35 days500 pairs / style

      Every bulk order and re-order runs on your mold. The mold stays reserved for your brand.

      Sample fees are credited against the bulk order.

      PUBLIC MOLD · FACTORY ASSET

      Public Mold

      US$0 tooling · 800+ molds to choose from
      FACTORY MOLD Brand ABrand BYour brand
      • Owned by the factory and available to every buyer
      • Ideal for fast, low-cost samples
      • Sole shape can’t change — other brands may sell the same sole
      • Customize color, compound and upper only
      PRIVATE MOLD · YOUR BRAND’S ASSET

      Private Mold

      from US$700 · 7–15 days to make
      YOUR MOLD LOGO Brand A ✕Brand B ✕Your brand
      • Paid for by your brand and owned by your brand
      • Made around your last, your sole profile and your logo
      • Used only for your orders — never offered to other buyers
      • The normal choice for brands building their own product

      Why Brands Open a Private Mold

      A Product Nobody Else Sells

      Your sole shape and tread are exclusive, so shoppers can’t find the same shoe under another label at a lower price.

      Your Logo in the Sole

      Brand marks molded into the outsole and sidewall — identity that can’t peel or wash off.

      Fit Built Around Your Last

      The sole is shaped to your adjusted last, so fit and toe shape are designed for your customer, not borrowed.

      Identical Re-Orders

      Every season runs on the same mold, so your best-seller looks and fits the same in year three as in year one.

      One Mold, Many SKUs

      The tooling is paid once and shared by every colorway and upper you build on it — the cost per pair keeps falling.

      An Asset You Own

      The mold is your brand’s property, reserved for your orders and protected under NDA.

      Sample on existing last & public moldPrivate mold (opening a mold)
      PurposeSee and test the design quicklyOwn the product you will sell
      CostFrom US$28 per pair, credited to bulkFrom US$700, by last and sole complexity
      Time3–7 days7–15 days mold making, plus a mold-trial sample
      What changesUpper, materials, colors, brandingLast, sole profile, tread, molded logo — plus everything on the left
      Who owns the moldThe factory — available to all buyersYour brand — used only for your orders
      Exclusive designNoYes
      Best forValidating ideas, price checks, early buyer feedbackLaunch collections, signature styles, long-term best-sellers
      06
      Construction

      Casual Shoe Constructions — Cupsole, Vulcanized & Cemented

      The construction decides the look, the feel, the mold and the lead time.

      Choose the construction before the styling. It decides which public molds you can sample on today — and what your private mold will need to be. It is the first question any sneaker manufacturer should ask you.

      CupsoleRubber cup stitched or cemented to the upperVulcanizedRubber foxing bonded by heat curingCemented Sole UnitPre-molded EVA / rubber / TPR unit glued to a lasted upper
      LookClean, defined sidewall; court and skate silhouettesThin, flat foxing tape; classic canvas profileSculpted midsole; runner and chunky profiles
      Underfoot feelFirm and stable, more structureFlexible and close to the groundMost cushioned; depends on EVA density
      WeightMedium to heavyLight to mediumLightest options available
      Durability focusStitch line and bond line at the toeFoxing adhesion and rubber curingBond strength between midsole and outsole
      Sample onPublic cupsoles from our libraryExisting vulcanized solesPublic sole units from our library
      Private mold gives youYour sidewall height, logo and treadYour tread pattern and toe bumperYour midsole shape, stack height and outsole
      Typical stylesSuede and calfskin low-tops, panelled sneakersCanvas and textile casual sneakersRetro runners, chunky mesh runners

      How molded soles are made — and why the mold type affects cost and lead time: injection molding in footwear manufacturing.

      Upper Materials

      Upper Materials for Leather & Suede Sneakers

      What each material suits, where it goes wrong, and how we control it.

      Suede, calfskin and textile can share the same sneaker silhouette, but they do not behave the same on the last. Material choice changes the pattern allowance, the lasting tension and the inspection points — not just the look.

      Cow Suede

      Soft, matte, premium hand-feel for minimalist sneakers.

      Risk
      Shade differences between hides; nap direction changes the color.
      Our control
      Same-lot cutting per colorway, nap direction marked on every pattern piece, approved shade band.
      Cost level
      Medium–high

      Calfskin Leather

      Smooth, refined finish for slip-ons and smart casual shoes.

      Risk
      Creasing at the vamp, surface marks, color variation after finishing.
      Our control
      Hide grading before cutting, vamp cut from the best area, finishing checked against the approved sample.
      Cost level
      High

      Nubuck

      Velvety top-grain alternative to suede with more strength.

      Risk
      Marks from handling and glue; uneven buffing.
      Our control
      Protective handling in lasting, glue-line masking, final brushing.
      Cost level
      Medium–high

      Canvas & Woven Textile

      Lightweight, colorful and cost-efficient.

      Risk
      Stretching on the last, fraying edges, glue bleed-through.
      Our control
      Backing laminate, folded or bound edges, controlled glue application.
      Cost level
      Low–medium

      Mesh & Knit

      Breathable panels for retro and chunky runners.

      Risk
      Shape loss, snagging, visible inner foam.
      Our control
      Reinforced underlays, overlay placement checks, lining color matched to mesh.
      Cost level
      Low–medium

      Recycled Materials

      Recycled textiles and linings for sustainability-led brands.

      Risk
      Claims your customers cannot verify.
      Our control
      Material documentation supplied with the bill of materials; GRS documentation on request.
      Cost level
      Medium
      08
      Fit

      Shoe Lasts, Fit & Size Grading

      Reviews that say “runs small” usually start at the last, not in production. Fit is fixed before your private mold is cut — the sole is shaped around the last. More on what a shoe last controls.

      Last Selection

      Sample on one of our existing casual lasts, then modify toe shape, vamp length or volume — or develop a new last for your brand together with your private mold.

      Fit for Your Market

      US, EU and UK sizing, regular or wide forefoot, and room for removable insoles are set at the last stage — they cannot be changed once the private mold is made.

      Size Grading & Wear Testing

      The approved base size is graded across the full run; the smallest and largest sizes are sampled and wear-tested before bulk cutting.

      EUUS MenUS WomenUKFoot length
      374.56.5423.5 cm
      385.57.5524 cm
      396.58.5624.5 cm
      40796.525 cm
      418107.526 cm
      428.510.5826.5 cm
      439.511.5927.5 cm
      4410129.528 cm
      45111310.529 cm
      Reference conversion only — your size chart is confirmed on your own last during sampling. New to footwear terms like vamp, toe spring and counter? See parts of a shoe.
      For New Footwear Brands

      From Idea to Tech Pack — Development Support for New Footwear Brands

      No tech pack? Most of our first-time clients start with photos.

      Factories quote and sample from a specification. When a brand only has reference images, every detail left open becomes a guess — and every guess becomes another sample round. Our development team turns your references into the specification for you. Here is what goes into a shoe tech pack.

      You send

      • Reference photos, a mood board or a pair you like
      • Your target retail price and customer
      • Size range and the markets you sell in
      • Your logo files and brand colors
      • Rough quantities for the first order

      We return

      • Technical drawing of the lateral, medial and outsole views
      • Material specification for every component
      • A recommended existing last and public mold to sample on
      • Private mold proposal: sole profile, tread and logo position
      • Sample fee, mold fee and a bulk price range
      Sample Development Specification Sheet With Lateral View, Material Table And Outsole View
      A sample development specification sheet: views, material table, color palette and outsole — the document your sample is built from.

      Common causes of extra sample rounds

      • Materials described by photo, not by thickness and finish
      • No target price, so the first sample is over-specified
      • Logo size and position left open
      • Size range decided after the last is approved
      RESULTA specification you own and reuse for your private mold, every re-order and every colorway.

      Still comparing factories? Read how to find shoe manufacturers in China.

      Order Quantities

      Low-MOQ Production Planning for Startup Shoe Brands

      500 pairs per style — and the colors and sizes can be mixed.

      The minimum is set per style, not per color or size. One style of 500 pairs can be split across several colorways and your whole size run, so a small brand does not have to buy 500 pairs of every color or size. It is how we, as a casual shoe manufacturer, keep a first order within reach of a new label. Our guide to how much it costs to make a shoe shows how samples, molds and quantity add up.

      Plan your first order

      2
      1
      500pairs minimum first order

      1 style × 500 pairs, split across 2 colorways. Colors and sizes mixed inside the style.

      LeverHow it lowers your entry cost
      Mixed sizes500 pairs per style spread across your colors and full size run
      Mixed colorsSplit the 500 pairs of one style across several colors; add more on the same last and mold later
      One private mold, many stylesBuild several uppers on one last and one mold — tooling paid once
      Shared materialsUse stock suede and linings instead of custom-dyed lots
      Credited samplesSample fees are deducted from the bulk payment
      RESULTA first drop sized to test the market, on a mold and specification that scale when it sells.
      Sampling

      Sample Development & Approval Process

      Each sample stage answers one question. Early stages run on our existing lasts and molds, so they are fast and inexpensive; the mold-trial stage confirms your private mold. Read more about our shoe sampling and prototyping process.

      STAGE 01

      Proto Sample

      Does the design work? Your upper on an existing last and public mold.

      3–7 days
      STAGE 02

      Fit & Revision

      Does it fit and feel right? Wear test, adjust last, pattern or padding.

      3–7 days / round
      STAGE 03

      Mold-Trial Sample

      Is your private sole right? First pairs from your new mold.

      after 7–15 day mold
      STAGE 04

      Confirmation & PP

      Sealed sample, then a pre-production pair from the line before bulk cutting.

      before bulk
      From 1 pairSample orders start at a single pair — no minimum for development.
      From US$28Per pair, priced by the complexity of the last. Low because it uses existing lasts and molds.
      CreditedSample fees are deducted from your bulk order payment.
      Bulk Consistency

      Bulk-to-Sample Consistency Control

      The approved sample is the contract. Bulk is measured against it.

      The most common complaint about casual shoe factories is that the bulk order does not look like the sample: a different suede shade, a wider toe, a logo a few millimetres off. The causes are predictable, so the controls can be too.

      Common causes

      Suede and leather from a different lot than the sample.

      Nap direction not marked on patterns.

      Lasting tension differs between operators.

      Logo position described in words, not measured.

      Our control measures

      Bulk materials reserved from the approved lot; shade band per colorway.

      Nap direction and cutting position marked on every pattern piece.

      Sealed confirmation sample at each line station.

      Logo and stitch positions measured from fixed reference points.

      What you receive

      Photos of the pre-production pair beside your confirmation sample.

      Material lot and shade-band photos before cutting.

      In-line and final inspection photos before the balance payment.

      Third-party inspection welcome at our factory.

      WITHOUT CONTROL

      • Two shades of brown in one carton
      • Toe shape changes between sizes
      • Logo height varies pair to pair

      WITH OUR CONTROL

      • One material lot per colorway
      • Graded last checked at smallest and largest size
      • Logo placed with a fixed jig; molded logo identical on every pair
      Raw Material Selection And Storage Area With Labelled Material Lots
      Material lots stored and labelled by order before cutting.
      Lasting And Assembly Production Line
      Lasting line: sealed sample at the station, tension checked by size.
      13
      Quality Control

      Bonding, Stitching & Durability Quality Control

      Four checkpoints where casual shoes most often fail.

      Sole separation, glue marks on suede, broken stitching and deep creasing are the defects customers return shoes for. Each one is checked at the stage where it is created, not only at the end.

      Upper Stitching Operations
      CHECKPOINT 1

      Upper Stitching

      • Stitch density and margin
      • Thread tension, no skipped stitches
      • Left–right panel symmetry
      Adhesive Spraying Machine For Sole Bonding
      CHECKPOINT 2

      Primer & Adhesive

      • Buffing depth on the bond line
      • Even adhesive coverage
      • No glue on visible suede
      Sole Pressing Machine
      CHECKPOINT 3

      Sole Attachment

      • Pressing time and pressure
      • Bond line gaps at toe and heel
      • Sole alignment to the upper
      Final Inspection And Packing Of Finished Shoes In Cartons
      CHECKPOINT 4

      Final Inspection

      • Appearance against the sealed sample
      • Pairing, sizing and labels
      • Carton count and packing list

      See every stage of the line on our shoe factory in China page.

      Pricing

      Costing & Target Price Planning

      What moves the price of a casual shoe — and what you can trade.

      A quote is the sum of decisions. Give us your target retail price and we show which choices keep you inside it, with the sample fee, mold fee and pair price listed separately — the way a sneaker manufacturer should quote a brand.

      Cost driverPushes price upBrings price down
      Upper materialFull-grain calfskin, special finishesCow suede, textile, mixed panels
      Panel countMany overlays and decorative stitchingFewer, larger panels
      Private moldNew last plus complex sole profile (one-time)Simpler profile; one mold shared by several styles
      LastNew custom last, complex toe shapesModified existing last
      BrandingMetal parts, many logo positionsEmbossing, printing, molded sole logo
      PackagingRigid boxes, dust bags, insertsPrinted folding box, tissue
      Quantity500 pairs split across many sizes and colorsLarger quantity per style
      RESULTA quotation built to your target price, with every option priced separately so you can see the trade-offs.
      15
      Launch Planning

      Production Timeline & Launch Planning

      Work back from the date your shoes must leave the factory.

      Most launches slip in development, not production. Pick your route and ship date to see when each step must start. We use our upper estimates: 7 days per sample round, 15 days for private mold making, 35 days for bulk — plus about a week to agree the specification and a few days to seal the confirmation sample.

      Bulk on
      Revision rounds

      Add ocean or air freight time for your destination. Peak months before Chinese New Year need extra buffer.

      Private Label

      Branding, Packaging & Retail Readiness

      Your brand on the shoe, in the sole, in the box and on the label.

      All branding positions are drawn on the specification sheet before sampling. With a private mold, your logo is molded into the outsole itself.

      Logo Methods

      Embossing, debossing, screen printing, heat transfer, embroidery, woven and rubber labels.

      Insole & Heel

      Printed or embossed insole logos, heel tabs, pull loops and back-stay branding.

      Molded Outsole Logo

      Your logo and tread pattern built into your private mold — on every pair, permanently.

      Shoe Boxes

      Printed folding boxes or rigid boxes, tissue paper, dust bags and inserts.

      Hangtags & Barcodes

      Hangtags, size and barcode labels, and retailer or marketplace labelling requirements.

      Carton Marks

      Shipping marks, carton labels and packing lists prepared to your warehouse format.

      Finished Shoes Boxed And Stored In The Warehouse
      Boxed and labelled, ready for your warehouse.
      Compliance

      Compliance, Testing & Labeling for US & EU Markets

      Know what your market asks for before the first carton ships.

      Requirements depend on where you sell, not where the shoes are made. Tell us your markets and sales channels; we plan materials, labels and testing around them.

      USUnited States

      • Material and country-of-origin labelling
      • Restricted-substance testing where your retailer requires it (e.g. California Prop 65)
      • Physical tests to ASTM methods on request

      EUEuropean Union & UK

      • Footwear material labelling for upper, lining and sole
      • REACH restricted substances in leather, textiles and adhesives
      • Test reports arranged through third-party laboratories

      EAEURussia & EAEU

      • EAC conformity for footwear sold in the Eurasian Economic Union
      • Russian-language labelling prepared with your importer
      Iso 9001:2015 Certification Badge
      ISO 9001:2015Quality management
      Iso 14001:2015 Certification Badge
      ISO 14001:2015Environmental
      Bsci Certification Badge
      BSCISocial compliance
      Ce Certification Badge
      CEEU conformity
      Astm Certification Badge
      ASTMTest methods
      Satra Certification Badge
      SATRAFootwear testing
      Tüv Süd Certification Badge
      TÜV SÜDFootwear labelling
      Grs Certification Badge
      GRSRecycled materials
      Lwg Certification Badge
      LWGLeather sourcing
      EACEAEU conformity

      Certificate copies and numbers available on request. [待换:证书扫描件 + 编号]

      18
      Confidentiality

      Design Protection & Confidentiality

      Your designs, your private molds and your customer list stay yours.

      A private mold is your brand’s property. We treat it — and every drawing and sample you send — the same way.

      NDA Before Development

      We sign your non-disclosure agreement before you send drawings or samples.

      Private Molds Belong to Your Brand

      Used only for your orders and never offered to other buyers. Public molds are the factory’s; private molds are yours.

      No Resale of Your Designs

      Your styles never appear in our catalog, showroom or social media without written permission.

      Controlled Sample Room

      Development samples and specification files are kept per customer and shared only with your project team.

      Inside the Factory

      Inside Our Casual Shoe Production

      Real photos from our workshops in Quanzhou, Fujian.

      Development, cutting, stitching, lasting and packing happen under one roof, so the people who built your sample are the people who supervise your bulk. Few things matter more when you choose a casual shoe manufacturer. Tour the full factory.

      Product Development And Sample Workshop
      01 · DEVELOPMENTSample WorkshopPatterns, materials and 3–7 day samples on existing lasts
      Upper Die Cutting Machine
      02 · CUTTINGDie CuttingFrom marked, nap-directed patterns
      Stitching Workshop Production Line
      03 · STITCHINGUpper Stitching2,200 uppers per day capacity
      Toe Puff Forming Machine
      04 · FORMINGToe & Heel FormingShape that holds after wear
      Lasting And Assembly Line In Operation
      05 · ASSEMBLYLasting & Assembly1,600 pairs per day capacity
      Finished Goods Storage Area
      06 · DISPATCHFinished GoodsInspected, boxed and stored by order
      Projects

      Casual Shoe Projects We've Developed

      Examples of the routes above in practice. [待替换:真实案例,上线前必须换]

      Route A

      [Start-up lifestyle brand, [market]]

      Starting point
      [Reference photos only]
      What we did
      [Sample on existing cupsole, then private mold with logo]
      Result
      [First 1,000 pairs, re-order after [ ] weeks]
      Route B

      [Apparel brand adding sneakers]

      Starting point
      [Brand guidelines + target price]
      What we did
      [One private mold, 3 styles on one last]
      Result
      [ ]
      Route C

      [Brand moving from another factory]

      Starting point
      [Golden sample + quality issues]
      What we did
      [Counter sample, mold transfer, shade-band control]
      Result
      [ ]
      Suede Cupsole Sneaker Developed By Seeu Shoe
      The Product Developer’s Note

      Suede, calfskin and textile can share the same sneaker silhouette, but they should never share the same construction settings. Suede needs its nap direction planned at the pattern; calfskin needs its best area saved for the vamp; textile needs backing before it goes on the last.

      We always sample on an existing last first. It costs the brand very little and tells us what the private mold needs to fix.

      RW
      Roy Wang
      General Manager, SeeU Shoe · 8 years in footwear development and manufacturing · Profile

      [待换:Roy Wang 本人照片]

      23
      Working Together

      How to Work With Us

      Five steps from first message to delivered order.

      Each step ends with something you approve in writing, so nothing moves forward on an assumption.

      01

      Brief & Quote

      Share references, target price and quantities. We reply with a route, sample fee, mold fee and price range.

      You prepare: images, sizes, markets

      02

      Sample

      Proto and fit samples on existing lasts and molds, 3–7 days per round.

      You pay: sample fee (credited later)

      03

      Private Mold

      Last adjusted, sole designed, mold made in 7–15 days; mold-trial sample sealed.

      You pay: mold fee, from US$700

      04

      Bulk Production

      Materials reserved, pre-production pair, bulk in 28–35 days.

      You pay: 30% deposit

      05

      Inspection & Shipping

      Final inspection photos, packing list and shipping documents.

      You pay: 70% before shipment

      30%Deposit to start bulk production
      70%Balance paid before shipment, after inspection photos
      T/TBank transfer via XTransfer [确认收款方式写法]
      FAQ

      Casual Shoe Manufacturer FAQ — Custom Sneakers & Casual Shoes

      What is the difference between a sample and opening a mold?

      A sample is made on our existing lasts and public outsole molds, so it costs from US$28 per pair and takes 3–7 days. Opening a mold means making a private outsole mold for your brand — the last, sole shape, tread and logo are adjusted, so it costs from US$700 and takes 7–15 days to make. Most brands sample first, then open a private mold for the styles they launch.

      Who owns the outsole mold?

      Public molds belong to the factory and can be used by any buyer. A private mold is paid for by your brand, belongs to your brand and is used only for your orders.

      What types of casual shoes can you manufacture?

      As a casual shoe manufacturer, we make suede cupsole sneakers, calfskin leather low-tops, concealed-lace slip-ons, panelled textile sneakers, retro runners and chunky mesh runners for men’s, women’s and unisex collections.

      Can you develop my shoes without a tech pack?

      Yes. Send reference photos, your target price, size range and logo. Our development team prepares the technical drawing and material specification for your approval before sampling.

      What is your MOQ for casual shoes?

      As a casual shoe manufacturer, we set the minimum at 500 pairs per style. Colors and sizes can be mixed within each style, so 500 pairs can cover several colorways and your full size run.

      How much does a sample cost, and can I order just one pair?

      Sample orders start from one pair. The fee starts from US$28 per pair depending on the complexity of the last, and is credited against your bulk order.

      How long do sampling and bulk production take?

      Samples on existing lasts and molds take about 3–7 days per round. A private mold takes 7–15 days to make. Bulk production takes about 28–35 days after sample approval.

      Can you make business casual shoes for corporate or uniform programs?

      Yes. Calfskin concealed-lace slip-ons and leather low-tops on a cupsole are common choices for business casual and smart casual programs, with branding on the insole, heel and molded outsole.

      How do you keep bulk production consistent with the approved sample?

      We reserve bulk materials from the approved lot, mark nap direction on every pattern piece, keep a sealed sample at each line station and send pre-production and final inspection photos before the balance payment.

      What are your payment terms?

      30% deposit to start bulk production and 70% balance before shipment, by bank transfer.

      Will you sign an NDA?

      Yes. We sign your NDA before you send designs, and private molds paid for by your brand are used only for your orders.

      What information do you need for a quotation?

      Style references or tech pack, upper material, sole direction, size range, quantity per style, branding and packaging needs, target price and destination country.

      Request a Quote

      Request a Casual Shoe Quote

      Tell us what you have. A photo and a quantity are enough to start.

      • EMAILSupport@seeushoe.com
      • PHONE / WHATSAPP+86 191-7002-5555
      • OFFICE HOURSMonday–Friday, 8:45–18:15 (China time)
      • FACTORYNo. 77 Yingbin East Road, Huian County, Quanzhou, Fujian, China

      What happens after you send

      1. We review your filesA developer checks construction, materials and mold options against your target price.
      2. You get a route and a priceSample fee, private mold fee, MOQ plan and timeline in one reply.
      3. We agree the specificationSpec sheet approved before the first sample is made.
      NDASend your NDA with the first message — we sign before you share drawings.
      =
      Quote list 0

      Contact Us

      Fill in the form below to book a 30 min no-obligation consulting session.

      I will reply within 24 hours.

      =